Designed with the capacity for high volume output, it holds 500 gallons of paint and 3000 pounds of beads. The Teton is dependable, exemplifies outstanding performance, and is ready for any long line project.
SPECIFICATIONS
specifications are subject to change.Chassis
- Peterbilt Model 220
- 33,000# GVWR
- 170" wheelbase with factory clear frame rail package
- Highway cruise control with low speed engine control down to 4 mph
- 160-amp alternator
- 21,000# air ride rear suspension
- 45-gallon left side fuel tank
- Left side DEF tank
- PACCAR Model PX-7 diesel engine with 250 HP at 2400 RPM
- Allision Model 2500RDS-P transmission
- 11 R22.5 tires with steel wheels
- Back up alarm
Deck
- Smooth aluminum with grip material strips
- 96" wide at operator station
- 84" wide from operator station to gun carriages
- 96" wide forward of the carriages
- 42" wide high railings with mid-rail
- 32' high railing with mid-rail and bump-out operator stations
- Welded on canopy to protect rear operators from sun
- Bostrom air ride operators seats with seatbelts & tethers
- (1) 18" x 18" x 24" toolbox mounted on rear
Mechanical Front Guide
- Pneumatic lift with swivel caster tire
- 6' to 10' extension, collapsible for transport
Gun Carriages
- Heavy duty steel parallel arm style gun carriages mounted in front of rear tires
- Single 13" diameter aircraft style tires center swivel caster wheel
- Pneumatic lift with lift switch in each SC-12 Master Control Box
- Auto-hold transport brackets
- Outrigger dual tube-in-tube construction with UHMWPE wear pads; 60' extension
- Orbital steering motor power steering with wheel and spinner knob
- Zinc plated adjustable brackets & rods
Paint Capacity
- 500-gal paint capacity using tote draw paint supply systems
- 2" plastic hookup fittings with 2" hookup hoses
- 1" LP paint recirculation
- 4 web straps provided for securing paint totes - 2 per tote
- Deck cutouts with cam & groove fittings for tote hose hookup when totes are removed
Paint Guns
- (3) Graco Model 238-377
HP Paint Pumps
- (2) Titan 13.0 GPM pumps with manual control
- (2) ASME surge chambers
- HP paint filter on each and pressure relief at each HP paint filter
- HP paint hoses .5" ID with .5" ID female swivel stainless steel fittings on both ends.
Bead Tank
- 3000lb capacity bead tank with step
- (3) 2" sight glasses
- Screen in the neck of tank
- Vacuum bead loading with 2" by 12' load hose with 3' stinger
Bead Guns
- (3) Graco Model 238-338 with 1" ID poly spring reinforced hoses
Auxiliary Engine/Air Compressor
- Boss Industries Model FT4 210DUS (Final Tier 4) 210 cfm @ 100 psi
- Utility mount with controls at rear operator's station
- 12-gal air tank
- Air jet dusters for surface prep
- Model 111F LaMan extractor/dryer with auto drain
- (2) Air take-offs - one at each gun carriage
Hydraulic System
- 30-gal hydraulic oil reservoir with 10-micron return line filter and 10-micron cartridge breather filter
- (1) pressure compensated hydraulic pump direct driven by John Deere 4045D Tier 4 Final auxiliary engine part of Boss Industries utility mount air compressor
- Five foot carriage extension
- Hydraulic oil cooler with 12-volt DC fan with temperature switch
- Solenoid controlled hydraulic bypass switch for easy start of auxiliary engine.
Electrical System
- Mid-size console
- Skip-Line, Inc. Model SC-12 timer system with (2), four-line Master Boxes with air jets switch and gun actuator switches
- 3-position alternate cycle switch
- 2-gal counts - 1 per color
- Heavy-duty magnet wrap
Intercom System
- David Clark Model U3800 (3) station with one H3492 single earpiece headset & two Model H3432 dual earpiece headsets
- (3) headset storage hooks
Safety Light System
- (2) Whelen Model L41AP amber LED 360 strobes front of deck
- (2) Whelen Model 70A02FAR amber LED directional light heads on rear of canopy railing
- (2) Whelen Model LINV2A mini amber LED 180 strobes on carriages, one per carriage