Plural Component Standard Equipment
- New cab and chassis, dual steer, automatic with 2 lift axles
- Sullair 210 cam utility mount air compressor
- Hydraulically driven pump (off of PTO on transmission)
- Hydraulic foldable steel guide wheel assembly movable to both sides of truck.
- Air dryer system with secondary water traps on bead tanks.
- Heavy duty steel platform with expanded metal grills, built in rear access steps, rear deck for setting cones.
- Heavy duty, hydraulically extendable, machined tube gun carriage assemblies.
- Hydraulically raised and lowered heavy duty scissor style gun carts.
- Hydraulic steering orbitals with steering wheels to control the lateral movement of the gun carriages.
- Two (2) lockable toolboxes mounted on the rear of the deck area with two (2) high back bucket seats with armrests and seat belts mounted on top of the toolboxes.
- Three (3) large lockable toolboxes mounted on the deck of the unit.
- Two (2) A.S.M.E. certified 4000 pound capacity bead tanks. Venturi vacuum load on both tanks and exhausted below the deck with mufflers.
- Three (3) A.S.M.E. certified 275 gallon capacity material tanks with bottom heat.
- 825 gallon total epoxy capacity.
- One (1) 20 gallon A.S.M.E. certified stainless steel solvent tank.
- One (1) hydraulically driven solvent pump.
- Three (3) hydraulically driven load pumps with three (3) attached load hoses.
- Load hoses stored under the truck bed.
- Two (2) Binks 6.7 GPM capacity stainless steel formulator “J” proportioning pumps.
- Heated weather-resistant steel boxes to cover the proportioning pumps.
- Four (4) nitrogen charged high-pressure accumulators.
- An apparatus that connects to a nitrogen bottle to facilitate recharging the accumulators.
- Material re-circulation system.
- Two (2) large dual-readout pressure gauges to monitor the catalyst and resin pressures.
- Arrow furnace with a 12-volt diesel burner assembly.
- Thermostatically controlled glycol circulation.
- Three (3) tube and shell heat exchangers and a glycol expansion tank.
- Left hand gun carriage to include:
- Two (2) Graco spray guns with static mixing tubes and tips.
- Two (2) linear actuators to raise and lower the guns.
- Four (4) Arrow drop on beaders.
- Two (2) blow air nozzles directly in front of the spray guns.
- Right hand gun carriage to include:
- One (1) Graco spray gun with static mixing tube and tip.
- One (1) linear actuator to raise and lower the gun.
- Two (2) Arrow drop on beaders.
- One (1) blow air nozzle directly in front of the spray gun.
- Adjustable electronic skip line mechanism complete with footage counters and printer for each gun and a digital speedometer.
- Weather-resistant boxes to protect the skip line switch boxes.
- Three (3) station, single ear, David Clark intercom system.
- Four by eight (4’x 8’) Wanco 25 light, multi-function arrow board.
- Two (2) Whelen dual flashing strobe lights mounted on the rear of the striper.
- 42” Whelen flashing light mounted on the cab of the striper.
- Quick coupler to the air system at the rear of the unit to facilitate the use of air tools.
- A camera guidance system
SPECIFICATIONS
specifications are subject to change.
